 |
Please
allow time for this page to load |
|
|
|
|
|
|
|
|
|
Our high-performance fiberscopes provides clear, sharp images of inaccessible areas, making remote inspection, evaluation and imaging possible in almost any situation.
They offer durable construction and exceptional value in a range of diameters and lengths. A simple knob controls the articulation while a focusing eyepiece enhances high-resolution imaging and accommodates 35mm and video cameras. The Flexible shaft resists water, gasoline or diesel and jet fuels, simplifying inspection of liquid-filled vessels.
|
|
|
|
APPLICATIONS
|
- CUSTOMS INSPECTIONS
- BOMB SQUAD / SWAT
- POLICE INVESTIGATIONS
- SURVEILLANCE
|
|
In Use with the
|
- U.S. CUSTOMS SERVICE
- U.S. NATIONAL GUARD
- U.S. COAST GUARD
- DRUG ENFORCEMENT ADMINISTRATION (DEA)
- FEDERAL, STATE AND CITY LAW ENFORCEMENT THROUGHOUT THE U.S.A.
- EXPORTED TO OVER 70 COUNTRIES AROUND THE WORLD
- OLYMPIC GAMES
|
|
Optical Inspection Device
|
|
The 6mm two-way articulation and the 8mm four-way articulation help quickly locate contraband in hard-to-reach areas. These systems are used daily by national, international, and government law enforcement agencies to successfully detect
concealed materials. Both the 6mm and 8mm compact systems include a fuel proof
fiberscopes, portable illuminator and all the accessories needed for on-site inspection.
In response to requests from police departments and U.S. Customs, these systems have been totally redesigned to improve articulation, image and brightness. The Sas Fiberoptics Inspection System is a critical equipment addition for customs , police departments, and countless others who need extended visibility in otherwise inaccessible areas.
|
|
|
|
Advantages
|
- Lower cost of acquisition
- Access hard to get areas with less wear on scope
- One scope for all applications
- More efficient Light Transfer
|
|
Features
|
- Durable construction tungsten braid
- Portable rechargeable battery pack
- Light source in handle
- Fuel proof shaft
|
|
High Light Handle
|
|
A portable illuminator standard in the Inspection Kit. DC powered, rechargeable 24 watt halogen light source designed for use under any condition where AC outlets are not readily available. The light source offers a high light output for photographic applications with instruments up to 60 inches. Can operate from battery, car cigarette lighter or wall outlet.
|
|
|
|
Optional Equipment for Fiberoptics Inspection Systems
|
- 90 degree right angle adapter
- 35mm camera adapter
- Video adapter
- AC powered illuminators
|
| Specifications |
| Fiberscope Viewing Element |
2 Way Articulation (6 mm Diameter)
4 Way Articulation (8 mm Diameter)
Tungsten Outer braid
Fuel proof inner sheath
Fibers in Image Bundle, 18,000 minimum
Focus, Objective Lens, 20 mm to Infinity
Field of View, Standard 70 degrees
Protective Cap, on lens
90 Degree Right Angle Adapter (Available Option) |
| Minimum Bend Radius |
2 Way Articulation: 35 mm
4 Way Articulation: 45 mm
|
| Articulation, in degrees |
2 Way Articulation: Up/Down 120°
4 Way Articulation: Up/Down 130° - Right/Left 100°
|
| Ratchet Brake on Controls |
| Image Bundle Length |
FO-xx(-)-1.5 = 60 inches (1.5 m)
FO-xx(-)-2.0 = 80 inches (2.0 m)
FO-xx(-)-xx = Special Length
|
| Light Guide Connections |
FO-xx(R) = Removable, Twist Lock Connection
FO-xx(F) = Fixed
FO-xx(B) = Bayonet (Retrofit for fiberscopes
purchased from us previously)
|
| Rubber Eyepiece |
|
|
|
|
Hi-Light Handle
|
Connects directly to the Fiberscope,
Lights Guides are eliminated
Size overall - 8.0L x 2.75D inches (203 x 70 mm)
Weight - 14 oz (0.4 kg)
Power Requirements - 12VDC, 25 W max.
Lamp, 12V Halide Arc, 5500 Kelvin - Model FO-1100L-C 24 W 1,000 hours
Connector - 3 pin, Locking
On/Off Switch, Integral Cooling Fan
|
|
|
|
Light Source, Remote (optional-Special order only)
|
Requires Light Guide to transmit light to scope
Size overall - 5.0L x 3.5W x 2.5D inches (127 x 90 x 64 mm)
Weight - 1.75 lbs (0.8 kg)
Power Requirements - 12VDC, 25 W max.
Lamp, 12V Halide Arc, 5500 Kelvin - Model FO-1100L-C 24 W 1,000
hours
Connector - 3 pin, Locking
On/Off Switch, Integral Cooling Fan, Manual Brightness Control,
Rubber Bumpers, Carrying Strap Ears.
|
|
|
|
Light Guides (optional-Special order only)
|
Used with Remote Light Sources
Universal, all light guides, (R) and (F)
Flexible corrosion resistant armor
Standard Length - 2.0 m (Optional lengths available)
Plug. Std. - Match ACMI Standard Light Source
Plug, Adapters (Optional) - Match other light sources,
must specify
Minimum Bend Radius - 35 mm
Removable only (R)
Connector to fiberscopes viewing element - Universal,
Twist Lock connection
|
|
|
|
12 VDC Vehicle Cable
|
|
25 ft (8 m), spring coiled, weatherproof, Cigarette Plug one end, Light Source or Hi-Light Handle connector at the other end.
|
|
|
|
AC/DC Converter Power Supply
|
AC/DC Converter - GlobTek Model or equivalent
Power Input - 90 240VAC, 50 60Hz
Power Output - 12VDC, 4200 MA
AC Power Cord - 5.5 ft (1.4 m), IEC 2-Pin connector to Converter
Connector to Light Source
|
|
|
|
Battery
|
Size overall - 6.5L x 4.5W x 3.0D inches (165 x 114 x 76 cm)
Weight - 4.5 lbs (2.0 kg)
Power output - 12VDC 4.5 AH
Connector - BEAU P-3302 Panel Mt. Plug, or equal
Mount - Carrying Strap Ears
Operating time per charge - 2 hours continuous with 24W lamp
|
|
|
|
Charger, AC Power
|
Power-Sonic - 12VDC 500 milliamp Cycling Duty
Plug - US Standard 2-Prong
Cable/Connector - 6 ft (1.5 m) w/CINCH S-302-CCT or Beau S-3302 Socket
|
|
|
|
Charger Cable, 12VDC Power (Vehicle)
|
|
8 ft (2.4 m), integral current limiting resistor, anti-reverse charge diode, cigarette lighter connector at one end, battery connector other end.
|
|
|
|
Transportation Case
|
|
Size overall - 23.0L x 18.0W x 8.0D inches (585 x 460 x 200 mm)
Hi-impact, hi-density polyethylene, minimum 0.10 to 0.15 inches (2.5 to 3.8 mm) thickness with 1/4 inch
(6.4 mm) molded ribbing for rigidity. Full length aluminum continuous piano hinge. Mating edges are a 1.84 inches
(47 mm) #6063 T2
aluminum valance moisture proof seal with padlock fittings. The interior is high density polyethylene die cut foam containing all
fiberscopes system components. The interior includes an additional 5 x 9 inches
(127 x 230 mm) closed storage/convenience box for spare parts and accessory items.
The transportation case cover includes a 9 x 19 inches
(230 x 480 mm) document pocket behind the covers foam padding.
|
|
|
| Lighting Brightness |
| External to the articulating Distal Tip, expressed in
Lux. |
| Measured with a 2 inch diameter Lux meter in a dark room, 21 W lamp |
|
2 inches
(51 mm) |
36 inches
(915 mm) |
| BEFORE: |
|
|
FO-20(R)-2.0 with Remote
Light Source and 2 Meter
Light Guide |
5,000 |
25 |
| NOW: |
|
|
| FO-20(R)-2.0 with Hi-Light Handle |
9,000 |
45 |
| BEFORE: |
|
|
FO-10(R)-2.0 with Remote
Light Source and 2 Meter
Light Guide |
3,000 |
15 |
| NOW: |
|
|
| FO-10(R)-2.0 with Hi-Light Handle |
5,500 |
27 |
|
|
|
|
|
|
|
This kit includes the Hi-Light Handle which is a 24W Xenon Super Bright White Lamp, with up to 1,000 hours of life and at least three times brighter than previous light handles. It provides a full spectrum color band for improved discrimination of objects.. Also included is an adapter for the bayonet connector scopes, 3 ft (1 m) coiled power cord with connector for NICAD battery furnished with original scopes, 25 ft (8 m) coiled 12VDC vehicle cable, auto switching 90 240VAC AC/DC Converter. Brings previous devices up to date.
|
|
|
|
SPECIFICATIONS
|
|
Hi-Light Handle
|
Does not require Light Guides or Remote Light Source
ON/OFF Switch, integral cooling fan
Kit includes spare Xenon bulb
Size overall - 8.0L x 2.75W inches (203 x 70 mm)
Weight - 0.8 lbs (0.35 kg)
Power Requirements - 12VDC, 25W max.
Lamp, 12V Xenon, 5500 K - C 24W 1000 Hours
Connector, Electrical - 3 pin, Locking
Connector, Light - Bayonet Adapter
|
|
|
|
Battery Power Cord
|
3 ft (1.0 m) with 3-Pin locking socket and 3-pin
connector for NICAD battery
|
|
|
|
Vehicle Power Cord
|
25 ft (8 m) coiled with fused cigarette light plug and
3-Pin locking socket
|
|
|
|
AC Power Supply
|
AC/DC converter
Power Input - 90 240VAC, Autoswitching, 50 60 Htz
Power Output - 12VDC 50W
Connector to Hi-Light Handle - 3-Pin locking socket
|
|
|
|
Light Specifications
|
Net lumens @ 1 meter - 10 (Previously 3)
Color of light - White (w/ blue spectrum) (Previously Yellow)
Degrees Kelvin - 5500K (Previously 3300K)
Lamp - Xenon (Halide Arc) (Previously Halogen)
|
|
|
|
Battery (Not required if original battery is working)
|
Optional at additional cost. Includes shoulder strap.
Size - 6.5L x 4.5W x 3.0D inches (165 x 114 x 76 mm)
Weight - 4.5 lbs (2.0 kg)
Power Output - 12VDC 4.5 AH, two hours per charge
Charger - 12VDC 500 milliamp Cycling Duty
|
|
|
|
HI-LIGHT HANDLE can be used with most other fibre optics inspection devices. We need to know the manufacturer, model number and year of purchase. Bring new life to your inspection capabilities see what you have been missing.
|
|
|
